Independent study aid. Not affiliated with or endorsed by NCEES. Always verify against the current NCEES exam specifications and reference handbook.

PE Water Resources and Environmental Learning Hub

The whole PE Civil: Water Resources and Environmental syllabus in one organised, completely free hub: all 12 NCEES areas with formulas, fully worked examples, common traps, mini-quizzes, topic videos and podcast episodes — following the official NCEES specification effective April 2024 for the 80-question exam. No account, no payment, no locked pages: every topic is free.

How this works

1

Learn the theory — free

Every one of the 12 area pages is free in full: formulas, three worked examples, traps and a podcast episode in the same pattern on every page.

2

Watch for the traps

Every page names the unit traps, wrong-formula swaps and state mix-ups the exam plants as distractors.

3

Practise, then simulate

Check yourself with the free mini-quiz on every area page, then step up to the timed PE WRE simulation on the exam site — see the exam page.

Current NCEES exam blueprint

The PE Civil: Water Resources and Environmental exam has 80 questions across 12 areas (NCEES specification, effective April 2024). The official question range for each area:

AreaOfficial range
Project Planning4–6 questions
Soil Mechanics3–5 questions
Materials4–6 questions
Analysis and Design6–9 questions
Hydraulics — Closed Conduit7–11 questions
Hydraulics — Open Channel7–11 questions
Hydrology8–12 questions
Groundwater and Wells4–6 questions
Surface Water and Groundwater Quality5–8 questions
Drinking Water Distribution and Treatment6–9 questions
Wastewater Collection and Treatment7–11 questions
Project Sitework9–14 questions

Always confirm against the current documents on ncees.org.

Choose your topic — all free

Area 1 · 4–6 questions · Free

Project Planning

Quantity take-off, cost estimating, schedules, and the economic analysis that decides between alternatives.

Area 2 · 3–5 questions · Free

Soil Mechanics

Lateral earth pressure, consolidation, compaction, bearing capacity, settlement and slope stability.

Area 3 · 4–6 questions · Free

Materials

Soil classification and boring logs, soil properties, concrete, piping materials and material test methods.

Area 4 · 6–9 questions · Free

Analysis and Design

Mass balance, hydraulic loading and solids loading — the design arithmetic behind every treatment process.

Area 5 · 7–11 questions · Free

Hydraulics — Closed Conduit

Energy, continuity and momentum; Hazen-Williams and Darcy-Weisbach; pumps, cavitation and pipe networks.

Area 6 · 7–11 questions · Free

Hydraulics — Open Channel

Open-channel flow, subcritical and supercritical regimes, stormwater collection, culverts and energy dissipation.

Area 7 · 8–12 questions · Free

Hydrology

Storm characteristics, rational and NRCS runoff, hydrographs, IDF relationships, time of concentration and stormwater management.

Area 8 · 4–6 questions · Free

Groundwater and Wells

Aquifers, groundwater flow, well and drawdown analysis, and dewatering.

Area 9 · 5–8 questions · Free

Surface Water and Groundwater Quality

Water-quality parameters, the dissolved-oxygen sag, eutrophication, standards and groundwater quality.

Area 10 · 6–9 questions · Free

Drinking Water Distribution and Treatment

Demands and storage, distribution pressure, and the treatment train from coagulation to disinfection CT.

Area 11 · 7–11 questions · Free

Wastewater Collection and Treatment

Gravity sewers and lift stations; BOD, activated sludge (F/M and MCRT), clarifiers and solids handling.

Area 12 · 9–14 questions · Free

Project Sitework

Excavation and embankment, layout and curves, erosion control, retaining walls, safety and construction methods.

Learn the areas

Water core cluster — Hydraulics (Closed Conduit and Open Channel), Hydrology, Groundwater and Wells

The centre of the exam: about half the paper. Energy and Manning feed hydrology and groundwater flow, so this cluster is worked first and revisited most.

Treatment cluster — Analysis and Design, Water Quality, Drinking Water, Wastewater

The mass-balance and loading arithmetic of Analysis and Design recurs inside every treatment process, so it is learned immediately before the processes themselves.

Ground and project cluster — Project Planning, Soil Mechanics, Materials, Project Sitework

The construction-flavoured areas. Project Sitework alone carries 9–14 questions — the largest single range on the exam — so it closes the plan with the most revision time.

Worked examples

Every topic page carries three fully worked original examples. Start with these three:

Podcasts

Every episode is free. The overview episode is below; each area page carries its own episode.

Retake plan

A failed attempt is diagnostic information. Map your result onto the 12 areas, rebuild only the weakest clusters with their formulas, examples and quizzes, then re-test under time. The four-week version is on the study plan page.

Practise next

When the areas feel familiar, move to timed practice: the exam page explains the separate PE WRE simulation and where to take it.

Free means free

Everything on this hub is free: all 12 topic pages in full, every mini-quiz, every podcast episode, the topic videos as they publish, and the full study plan. There is no account, no unlock and no paid tier for this hub. The only paid product mentioned here is the separate PE WRE exam simulation on exam.waterresourceshub.com — a timed rehearsal, sold separately, which this hub prepares you for but is not part of.

Browse the 12 free topics

Frequently asked questions

Which specification does this hub follow?

The NCEES PE Civil: Water Resources and Environmental specification effective April 2024: 80 questions across 12 areas, with the official ranges shown in the blueprint above.

Is this hub really free?

Yes — completely. All topic pages, mini-quizzes, podcasts and the study plan are free, with no account or unlock. The PE WRE exam simulation on the separate exam site is a paid product; this learning hub is not.

Is this affiliated with NCEES?

No. This is an independent study aid, not affiliated with or endorsed by NCEES.

Where do I take the timed simulation?

On the exam site — see the exam page for what it covers and the link through.

I failed the PE once. Where do I start?

With the retake route on the study plan page: diagnose by area, rebuild the weak clusters, re-test under time.

Who this is for

PE Civil: Water Resources and Environmental candidates preparing for the 80-question exam — first-timers who want one organised route through all 12 areas, and retakers who need a targeted rebuild of their weakest areas.

Start with the plan

A ten-week first-attempt route and a four-week retake route through all 12 areas — all of it free.