Independent study aid. Not affiliated with or endorsed by NCEES. Always verify against the current NCEES exam specifications and reference handbook.

PE WRE Learning Hub · PE Civil: Water Resources and Environmental · Area 2 of 12

Soil Mechanics — PE WRE

Topic video on its way — a detailed walkthrough of Soil Mechanics, with animations and worked examples.

Watch the topic: the detailed video walkthrough of Soil Mechanics will sit here.

Take the 3-question mini-quiz ↓

Lateral earth pressure

Soil pushes sideways in proportion to the vertical effective stress. Rankine's active coefficient for a level backfill is Ka = (1 − sin φ)/(1 + sin φ); the passive coefficient Kp is its reciprocal. Active pressure acts when the wall yields away from the soil; at-rest pressure, K0 ≈ 1 − sin φ, is larger than active and applies to unyielding walls. The pressure diagram is triangular, so the resultant acts at one-third of the height from the base.

Ka = (1 − sin φ)/(1 + sin φ)  ·  σh = Ka γ z  ·  Pa = ½ Ka γ H²

Worked example Active pressure at depth

Given: A soil has φ = 30° and unit weight γ = 120 lb/ft³. Find the active lateral pressure at a depth of 10 ft.

Solution:

  1. Ka = (1 − sin 30°)/(1 + sin 30°) = 0.5/1.5 = 0.333.
  2. Vertical stress at 10 ft: 120 × 10 = 1,200 lb/ft².
  3. σh = 0.333 × 1,200 = 400 lb/ft².

Answer: Active pressure at 10 ft = 400 lb/ft².

Consolidation and settlement

When a saturated clay layer is loaded, the extra pore pressure drains away over time and the layer compresses — consolidation settlement. For a normally consolidated clay, s = [H0/(1 + e0)] Cc log[(σ′ + Δσ)/σ′], with the logarithm base 10. Compaction is different: it is the mechanical densification of fill, checked against the Proctor optimum moisture content, and it happens during construction, not over years of drainage.

s = [H0/(1 + e0)] · Cc · log10[(σ′0 + Δσ)/σ′0]  ·  σ′ = σ − u

Worked example Primary consolidation settlement

Given: A clay layer is 10 ft thick with e0 = 1.0 and Cc = 0.30. The average effective stress rises from 1,000 to 2,000 lb/ft². Find the settlement.

Solution:

  1. Stress ratio: 2,000/1,000 = 2.0; log10(2.0) = 0.301.
  2. s = (10/2.0) × 0.30 × 0.301 = 0.452 ft.
  3. Convert: 0.452 × 12 = 5.4 in.

Answer: Settlement ≈ 0.45 ft (about 5.4 in).

Bearing capacity and slope stability

Terzaghi's bearing-capacity equation adds three terms: cohesion, surcharge and the weight of soil in the failure wedge, qult = cNc + qNq + 0.5γBNγ. For a saturated clay under undrained loading (φ = 0), Nc = 5.14, Nq = 1.0 and Nγ = 0. Allowable pressure divides the ultimate by a factor of safety, usually 3. Slope stability is the same idea in ratio form: factor of safety = resisting forces (or moments) ÷ driving forces (or moments).

qult = cNc + qNq + 0.5γBNγ  ·  qall = qult/FS  ·  FSslope = resisting / driving

Worked example Allowable bearing pressure on clay

Given: A footing bears on clay with c = 500 lb/ft² (φ = 0) at a depth of 3 ft in soil with γ = 110 lb/ft³. Using Nc = 5.14 and Nq = 1.0, find qult and qall with FS = 3.

Solution:

  1. Surcharge q = 110 × 3 = 330 lb/ft².
  2. qult = 500 × 5.14 + 330 × 1.0 + 0 = 2,570 + 330 = 2,900 lb/ft².
  3. qall = 2,900 / 3 = 967 lb/ft².

Answer: qult = 2,900 lb/ft²; qall ≈ 967 lb/ft².

3-question mini-quiz

Soil Mechanics

Choose your answer, then check it to see the result and explanation.

1. For a soil with φ = 0°, Rankine's active earth-pressure coefficient Ka is:

2. At a point 10 ft below ground, the soil above the water table (4 ft thick, γ = 110 lb/ft³) overlies saturated soil (γ = 120 lb/ft³). The effective stress at 10 ft is closest to:

3. A slope has resisting moments of 9,000 ft·lb and driving moments of 6,000 ft·lb. Its factor of safety is:

Ready for the complete rehearsal?

Step up from this three-question taster to the full timed PE WRE simulation — 80 questions in exam conditions, with a per-area diagnostic.

Keep building exam speed

This whole hub is free — every area page, mini-quiz and podcast. When you are ready to rehearse under exam conditions, the separate PE WRE exam simulation runs the full 80 questions against the clock.

Preview the PE WRE exam simulation Open the exam simulator