PE WRE Learning Hub · PE Civil: Water Resources and Environmental · Area 5 of 12
Hydraulics — Closed Conduit — PE WRE
Topic video on its way — a detailed walkthrough of Hydraulics — Closed Conduit, with animations and worked examples.
Watch the topic: the detailed video walkthrough of Hydraulics — Closed Conduit will sit here.
Take the 3-question mini-quiz ↓
Energy, continuity and momentum
Continuity for incompressible flow is Q = AV at every section, so velocity rises as the square of the diameter ratio when a pipe contracts. The energy equation tracks total head — elevation plus pressure head plus velocity head — between two points, adding pump head and subtracting losses. The momentum equation handles forces: bends, nozzles and jets, where the question asks for a force rather than a head.
Q = A1V1 = A2V2 · z + p/γ + V²/2g = constant ± pump head − losses
Worked example Velocity through a contraction
Given: Water flows at 4 ft/s in a 12-in pipe that contracts to 6 in. Find the velocity in the 6-in section.
Solution:
- Continuity: V2 = V1 × (D1/D2)².
- V2 = 4 × (12/6)² = 4 × 4 = 16 ft/s.
Answer: Velocity in the 6-in pipe = 16 ft/s.
Pressure conduits: Hazen-Williams and Darcy-Weisbach
Darcy-Weisbach is dimensionally sound for any fluid: hf = f (L/D) V²/2g, with the friction factor from the Moody chart or the Reynolds number and roughness. Hazen-Williams is an empirical water-only formula, hf = 4.73 L Q1.85/(C1.85 d4.87) in US units, where C falls as the pipe ages and roughens. Minor losses — entrances, bends, valves — add as K V²/2g each. Exam traps live in the units: Hazen-Williams in US form takes Q in ft³/s and d in feet.
Darcy: hf = f (L/D) · V²/2g · Hazen-Williams (US): hf = 4.73 L Q1.85 / (C1.85 d4.87)
Worked example Hazen-Williams head loss
Given: Find the friction loss in 1,000 ft of 12-in pipe (d = 1.0 ft) carrying 1.0 ft³/s with C = 100.
Solution:
- Q1.85 = 1.0 and d4.87 = 1.0, so only C matters in the denominator.
- C1.85 = 1001.85 = 5,012.
- hf = 4.73 × 1,000 / 5,012 = 0.94 ft.
Answer: Friction loss ≈ 0.94 ft.
Pumps, cavitation and pipe networks
A pump operates where its head–capacity curve crosses the system curve (static lift plus losses that grow with Q²); neither curve alone gives the operating point. Power follows P = γQH/η. Cavitation strikes when the local pressure falls to vapour pressure: net positive suction head available must exceed the head required, NPSHA > NPSHR, or vapour bubbles form and collapse on the impeller. In networks, parallel pipes split flow at equal head loss, series pipes add head loss at equal flow, and the Hardy-Cross method balances loop flows until head losses close around each loop.
Water power = γQH · Brake power = γQH/η · Affinity: Q ∝ N, H ∝ N², P ∝ N³
Worked example Pump brake power
Given: A pump delivers 2.0 ft³/s against 50 ft of head at 80% efficiency. Find the brake power. (γ = 62.4 lb/ft³; 1 hp = 550 ft·lb/s.)
Solution:
- Water power = 62.4 × 2.0 × 50 = 6,240 ft·lb/s = 6,240/550 = 11.35 hp.
- Brake power = 11.35 / 0.80 = 14.2 hp.
Answer: Brake power ≈ 14.2 hp.