Independent study aid. Not affiliated with or endorsed by NCEES. Always verify against the current NCEES exam specifications and reference handbook.

PE WRE Learning Hub · PE Civil: Water Resources and Environmental · Area 5 of 12

Hydraulics — Closed Conduit — PE WRE

Topic video on its way — a detailed walkthrough of Hydraulics — Closed Conduit, with animations and worked examples.

Watch the topic: the detailed video walkthrough of Hydraulics — Closed Conduit will sit here.

Take the 3-question mini-quiz ↓

Energy, continuity and momentum

Continuity for incompressible flow is Q = AV at every section, so velocity rises as the square of the diameter ratio when a pipe contracts. The energy equation tracks total head — elevation plus pressure head plus velocity head — between two points, adding pump head and subtracting losses. The momentum equation handles forces: bends, nozzles and jets, where the question asks for a force rather than a head.

Q = A1V1 = A2V2  ·  z + p/γ + V²/2g = constant ± pump head − losses

Worked example Velocity through a contraction

Given: Water flows at 4 ft/s in a 12-in pipe that contracts to 6 in. Find the velocity in the 6-in section.

Solution:

  1. Continuity: V2 = V1 × (D1/D2)².
  2. V2 = 4 × (12/6)² = 4 × 4 = 16 ft/s.

Answer: Velocity in the 6-in pipe = 16 ft/s.

Pressure conduits: Hazen-Williams and Darcy-Weisbach

Darcy-Weisbach is dimensionally sound for any fluid: hf = f (L/D) V²/2g, with the friction factor from the Moody chart or the Reynolds number and roughness. Hazen-Williams is an empirical water-only formula, hf = 4.73 L Q1.85/(C1.85 d4.87) in US units, where C falls as the pipe ages and roughens. Minor losses — entrances, bends, valves — add as K V²/2g each. Exam traps live in the units: Hazen-Williams in US form takes Q in ft³/s and d in feet.

Darcy: hf = f (L/D) · V²/2g  ·  Hazen-Williams (US): hf = 4.73 L Q1.85 / (C1.85 d4.87)

Worked example Hazen-Williams head loss

Given: Find the friction loss in 1,000 ft of 12-in pipe (d = 1.0 ft) carrying 1.0 ft³/s with C = 100.

Solution:

  1. Q1.85 = 1.0 and d4.87 = 1.0, so only C matters in the denominator.
  2. C1.85 = 1001.85 = 5,012.
  3. hf = 4.73 × 1,000 / 5,012 = 0.94 ft.

Answer: Friction loss ≈ 0.94 ft.

Pumps, cavitation and pipe networks

A pump operates where its head–capacity curve crosses the system curve (static lift plus losses that grow with Q²); neither curve alone gives the operating point. Power follows P = γQH/η. Cavitation strikes when the local pressure falls to vapour pressure: net positive suction head available must exceed the head required, NPSHA > NPSHR, or vapour bubbles form and collapse on the impeller. In networks, parallel pipes split flow at equal head loss, series pipes add head loss at equal flow, and the Hardy-Cross method balances loop flows until head losses close around each loop.

Water power = γQH  ·  Brake power = γQH/η  ·  Affinity: Q ∝ N, H ∝ N², P ∝ N³

Worked example Pump brake power

Given: A pump delivers 2.0 ft³/s against 50 ft of head at 80% efficiency. Find the brake power. (γ = 62.4 lb/ft³; 1 hp = 550 ft·lb/s.)

Solution:

  1. Water power = 62.4 × 2.0 × 50 = 6,240 ft·lb/s = 6,240/550 = 11.35 hp.
  2. Brake power = 11.35 / 0.80 = 14.2 hp.

Answer: Brake power ≈ 14.2 hp.

3-question mini-quiz

Hydraulics — Closed Conduit

Choose your answer, then check it to see the result and explanation.

1. Friction loss by Darcy-Weisbach with f = 0.02, L/D = 500 and V = 6 ft/s (g = 32.2 ft/s²) is closest to:

2. Two identical pumps in parallel, discharging into a common header, ideally deliver:

3. If a pump's speed rises by 10%, its head rises by about:

Ready for the complete rehearsal?

Step up from this three-question taster to the full timed PE WRE simulation — 80 questions in exam conditions, with a per-area diagnostic.

Keep building exam speed

This whole hub is free — every area page, mini-quiz and podcast. When you are ready to rehearse under exam conditions, the separate PE WRE exam simulation runs the full 80 questions against the clock.

Preview the PE WRE exam simulation Open the exam simulator